ADA Tiles

/

AlertCast

detectable-warning-cast-in-place-alertcast-diagram.jpg
  1. Reinforced Thermoset composite engineered for excellent wear and strength.
  2. Safety-speckled surface for additional slip resistance.
  3. Cross section of truncated dome showing dimensions.
  4. Perimeter beveled-edge provides safe transition for pedestrians.
  5. Innovative safety spars reinforce panel strength and increase traction for pedestrians.
  6. In-line domes spaced on exact 2.35" centers (A.D.A. 4.29.2)
  7. Pre-drilled anchor holes speed installation.
  8. Exact required detectable warning length.
  9. Exact required detectable warning width.
  10. Proprietary fasteners for easy installation

RediMat

No adhesives to apply – simply remove protective backing, exclusive peel and stick technology

Installs on both asphalt and concrete – multi-surface adhesive system

Conforms to uneven surfaces – flexible polyurethane material

Unbreakable – will not chip, crack, or splinter

Radius Ready – Available in “Wedge” shape

Beveled Edge – For easy pedestrian access

RediMatWZ™ – For temporary work zone applications, reusable, and safety orange color

Includes stainless steel anchors to meet DOT requirements

Roll Up Signs, Sign Stands, Cross braces + More

/

1st Vanguard carries a complete selection of reflective roll-up signs, cone signs, sign stands and more.  Roll up signs available in 36" and 48" in both mesh and reflective.  Find more signs and additional signage products here. 

sign with stand.png
roll-signs.jpg

Watch our easy instructions for roll-up sign and stand set-up.

48" Heavy duty orange fiberglass cross brace, no clamp, with flip-up flag system with 3-N-1 tri- clamp assembly. Sign stands with mini-spring, single spring or double springs.

Cone Signs

Standard options shown. Available in standard and custom legends.

Cone Sign Options small.png
Cone sign stand.png

Preformed Thermoplastic

/

A premium product that requires no preheating which will save valuable installation time.  PreMark® is made for use on public streets, highways, local roads, and airport landside areas as well as parking lots and roadways at shopping centers, school campuses, business parks and more –– especially at intersections with heavy traffic where durability and proven performance is a must-have.

electric-vehicle-parking

Chip Seal Markers

/

Chip seal markers are typically installed prior to spraying while the center-line stripes are still visible. This avoids having to re-measure lanes.

The markers have a clear plastic cover attached with a single staple. With the markers in place, just spray right over them. When the seal coat has had enough time to dry, the formerly clear plastic cover is removed, exposing a clean marker.

Raised Pavement Markers

/

Durable, lightweight and impact resistant Raised Pavement Markers.

  • Reflective and non reflective raised pavement markers.
  • Wet & dry reflectivity.
  • Textured surface on bottom for better bond.

Spill Control

/

First Vanguard offers a full line of premium and economy fine fiber sorbents designed to absorb and contain spills ranging from hydrocarbon-based liquids to non-aggressive and aggressive chemicals.

Pedestrian Barricade

/

Restricts pedestrians from entering an unauthorized or dangerous area. Durable construction to sustain heavy use.

K-Rail Marker

/
Barrier Reflectors.jpeg
Krail reflector.png

RetroFlex Reflectors manufactures multipurpose reflectors for K-rail, guardrail and lath. First Vanguard is an authorized distributor for RetroFlex.

  1. For K-rail installation simply bend, insert into lifting hole, release and push it in. No adhesive required, a reusable and Caltrans approved product.

  2. For use on wooden guardrail and sign posts insert 3/4" roofing nails part way in, hold the reflector in place and drive the nails in.

  3. Simply bend slide onto lath through the interior slots. Good for temporary roadside delineation and marking utilities.

Reflectors are used to delineate k-rail and guard rail.

  • High-intensity reflective area

  • Available with 1 or 2 reflective sides

  • Permanent or temporary install

  • Caltrans approved

Adhesives

/

 

Bundy - for adhering plastic or ceramic raised pavement markers.

SuperBundy - for adhering objects on horizontal surfaces such as delineator posts.

Bituminous Marker Adhesive is a hot melt bituminous adhesive used to permanently bond pavement markers to Portland cement concrete and asphaltic concrete.

Butyl adhesive pads are a quick and easy way to firmly adhere road reflectors, delineator posts, car stops, speed bumps and other traffic control devices to asphalt or concrete surfaces. 

Epoxy Resin provides great adhesive to surface areas. Two part epoxy, simply mix part A and part B together. Quick drying times coupled with advanced hardening prove to be a winning

Scorpion® Impact Attenuators

/

The Scorpion consists of strut and cartridge sections that are linked together on a support frame. The curved side rails are made from corrosion resistant aluminum tubes, which offer full width impact protection along the entire length of the unit. The side rails were designed to re-direct errant vehicles away from the rear of the truck (coffin corner). Other manufacturers Crash Attenuator models have little or no side-angle impact protection.

The aluminum boxes are filled with a moisture proof, aluminum honeycomb material. The boxes, together with the curved side rails, absorb the energy from an impacting vehicle. The aluminum boxes are painted with a bright yellow powder-coated finish, for lasting durability.

DCA25USI4CAN Whisper Watt Generator

/

The DCA25USI4CAN provides a prime rating of 20 kW (25 kVA) and a standby rating of 22 kW (27.5 kVA).

A sound proof housing keeps operating noise levels to 59 dB(A).

The unit features a mechanical governor that maintains steady state 60 Hz within 3-5% from no load to full load.

A comprehensive analog control panel provides instrumentation including AC ammeter, AC voltmeter, frequency meter, AC circuit breaker, engine gauges and much more.

DA7000SSA1 Whisper Watt Generator

/

The DA7000SSA1 is a 7 kW Single Phase generator with a 1.0 power factor, 120/240 volt output and has a 2-pole field.

It features a mechanical governor that maintains a steady state 60 Hz within 3-5% from no load to full load.

Its comprehensive analog control panel includes instruments such as an ammeter, frequency meter, AC circuit breaker and much more.
At 538 lbs (244 kg), the DA7000SSA1 is the lightest model in the series of WhisperWatt Super-Silent Generators.