Wayne Sweepers
/
Wayne Sweepers manufacturers top performing, street sweepers and collection refuse vehicles for municipal and commercial use. First Vanguard is an authorized dealer of Wayne products.
Quadguard Crash Cushion
/
The new family of QuadGuard crash cushions offers the latest technology for shielding hazards 610 to 3048 mm (2' to 10').
Each Quadguard System consists of crushable, energy-absorbing cartridges surrounded by a framework of Energy’s exclusive steel Quad-Beam™ panels. These new crash cushions redefine NCHRP 350, Test Level 3 performance for redirective, non-gating attenuators.
The QuadGuard Systems have successfully passed the complete NCHRP 350, Test Level 3 test matrix with both the light car and high center-of-gravity pickup truck at speeds up to 100 km/h (62 mph) at angles up to 20°. Higher speed units are available.
TAU-M Crash Cushions
/
TAU-M Non-Gating Redirective Systems are ideally suited for roadway hazards such as the ends of rigid concrete barriers, steel barrier, bridge piers, signs and more.
Shields Multiple Width Hazards
Partially Reusable Design
Quick and Easy to Install
NCHRP 350 Accepted
Tamco Tools
/
- Narrow Chisels
- Moil Point
- Chipping Hammer Chisel
- Chipping Hammer Point
- Jumbo Buster Upper Sleeves
- Jumbo Buster Lower Sleeves
- Jumbo Rubber Bumper
- Jumbo Poly Bumper
- Jumbo Buster Lock Spring
- Jumbo Rivet Buster
- Moil Point Rivet Buster
First Vanguard's relationship with industry leaders such as Tamco Tools make its easy for you to get the products you need, when you need them.
- Paving Breaker Steel
- Rivet Buster Steel
- Chipping Hammer Steel
APT Tools
/
American Pneumatic Tools (APT) is a leading provider of exceptional tools for the construction and industrial markets.
Superior performance, excellent product reliability, competitive pricing, ergonomic designs, and a warranty second to none, are what makes American Pneumatic Tools an industry leader.
First Vanguard is an authorized distributor of American Pneumatic Tools.
- Pavement Breakers
- Rock Drills
- Clay & Trench Diggers
- Backfill Tamper
- Chipping Hammers
- Rivet Busters
Road Plate System
/
Ideal substitute for steel plates.
Easy to install modular system. No special lift equipment needs. Two-man lift for installation (97 lbs. per section).
Tested to vehicle weights of 96,800 lbs. Single wheel load, 14,520 lbs. at 27.5" trench width.
- No rust or corrosion, long lasting polymer material
- No “rattle” from crossing vehicles - rubber ends adapt to road surface and eliminate noise
- Deters metal thieves
- Anti-slip surface, tread pattern provides grip
- Ramp design slows traffic for increased safety
- Features “Drop Pins” that increase stability - pins protrude into trench preventing lateral movement of plate
- Steel linking brackets lock sections together
- End sections must be bolted to ground in order to lock unit into position
- Stacks securely for transportation and storage
Trench Covers
/
Trench Covers designed to cover trenches up to 35" and 27".
- Takes the weight of a vehicle up to 4,410 lbs.
- Deters metal thieves
- Beveled edge prevents tripping
- Molded from a single piece of fiberglass composite - underside has ribbed framework for added strength
- Recommend bolting to road surface
- Available in yellow
Pedestrian Trench Covers -- Ideal for Sidewalk Construction
- For Pedestrians Only - takes up to 553 lbs.
- Covers trenches up to 27.5”
- Anti-slip surface
- Smooth rubber edge greatly reduces tripping hazard Resists sliding, no need to bolt down
- - flexible material which grips the surface underneath
- Available in yellow
Curb Ramp
/
SafeCurb Ramp
- Ramp adapts to curb heights from 3” to 6.3”
- Withstands loads up to 553 lbs.
- Anti-slip surface
- Raised sides prevent vehicle run off Molded from high density polyethylene Stacks for transport and storage
- Bolt to road and walkway surface for added stability Available in yellow
- Overall Dimensions: 50”L x 29.5”Wx 3”H Weight: 13.2 lbs.
Rubber Tracks
/
Rubber tracks for excavators, skids, mini-excavators and more.
- Yanmar
- Hitachi
- Mustang
- Bobcat
- IHI
- Ditch Witch
- Kobelco
- Volvo
- Komatsu
- Cat
- Kubota
- Daewoo
- Gehl
- John Deere
- JCB
After market replacements also available.
Tamper
/
Bomag Tamper BT 65. Light equipment tamper is robust and easy to use.
Used Equipment for Sale
/Through our partnership with Meridian Pacific, 1st Vanguard is able to offer our customers quality, used equipment for purchase. Used equipment is listed on Machinery Trader and updated frequently. If you can't find what you are looking for, let us know.
Recently added: 27 YD Automated Side Loading Refuse Truck: Wayne Curbtender
Stop Slow Paddles
/
Two-sided traffic signaling sign indicates STOP and SLOW. Ideal for traffic control and lane closures. Standard paddle options for 12" hand-held paddle or 72" metal handle.
TAPCO flashing LED BlinkerPaddles contain 8-super-bright LEDs on each face flash in unison, dramatically increasing the paddle's visibility to warn drivers of the presence of guards and schoolchildren.
BlinkerPaddles can flash their warning all day long, and they are especially effective in rain, fog, snow, and during low light conditions. Also available - 84" telescoping pole to mount paddle.
Safety Wear
/First Vanguard now offers a wide variety of personal Protection Equipment.
First Vanguard can establish accounts for you with any of our manufacturers and dealers who provide quality protective wear and equipment. Looking for Dewalt Gear? Contact us for a complete 2015 catalog of Dewalt Gear's tough and reliable protective and safety gear.
Ladders
/
Titan ladders
A-FRAME STEP LADDER FIBERGLASS DOUBLE STEP
- 4ft. Step Ladder
- 5ft. Step Ladder
- 6ft. Step Ladder
- 7ft. Step Ladderr
- 8ft. Step Ladder
- 10ft. Step Ladder
- 12ft. Step Ladder
A-FRAME STEP LADDER FIBERGLASS DOUBLE STEP
- 4ft. Step Ladder TYPE 1A
- 5ft. Step Ladder TYPE 1A
- 6ft. Step Ladder TYPE 1A
- 8ft. Step Ladder TYPE 1A
- 10ft. Step Ladder TYPE 1A
- 12ft. Step Ladder TYPE 1A
- 14ft. Step Ladder TYPE 1AA
- 16ft. Step Ladder TYPE 1AA
SINGLE LADDER HEAVY DUTY FIBERGLASS TYPE 1A
- 8ft. Ladder
- 10ft. Ladder
- 12ft. Ladder
- 14ft. Ladder
- 16ft. Ladder
First Vanguard is also an authorized distributor of all Werner ladders. Werner's reputation for manufacturing quality climbing equipment makes it an excellent choice to ensure accessibility and safety.
Also available from Werner:
- Stepladders
- Multi-Purpose Ladders
- Fire Escape Ladders
- Stages
- Planks
- Pump Jacks
Traffic Drum
/
Channelizer traffic drums are durable and impact resistant.
- Convenient top handle.
- (2) holes on top for attaching barricade lights.
- Anti-roll sections on base of drum.
- Base made of recycled truck tires. Also available with plastic ring base.
- Overall dimensions: 40"H x 23"W. Weight: 8 lbs.
- NCHRP-35 Accepted, Meets MUTCD Standards
Delineators
/
42" delineators with recycled rubber base. Delineators are available with white or yellow tape.
Used to indicate the roadway alignment. UV inhibitors help minimize fading of the fluorescent orange tube. Durable Polyethylene construction for durability and flexibility.
Posts are constructed of low density polyethylene with support rings around the reflective bands for added protection. Bases are constructed of 100% recycled rubber.Tested and certified to meet the crashworthy requirements of NCHRP-350.
A-Frame Barricade
/
Perfect for crowd control, road closures and parking lots
- Accepts wood or plastic boards
- Use with one board or two
- Flashing light mounting receptacle on each leg
- Stacking legs makes transportation and storage easy
- Boards weigh 1 lb. per foot and are available in three lengths, (6', 8', and 10')
- Sold as sets or as component parts
Plastic Barricades
/
Type 1 and Type 2 Plasticade barricades
- All plastic and maintenance free, never rusts, needs painting, or leg straightening
- Molded hollow so it can be internally ballasted with up to 10 lbs. of dry sand
- Molded handles with mounting holes for attaching flashing lights
- Features “click lock” hinges for a positive interlock in the open position
- Sandbag bar (if additional weight is required)
- Stacking lugs keep stacked units from sliding
- Names can be stenciled on the barricade for identification
- NCHRP-350 Accepted, Meets MUTCD Standards
Water-Wall Temporary Crash Barrier
/
The TrafFix Water-Wall Barrier is an economical and highly effective temporary crash barrier system. Water-Wall is a durable temporary crash barrier system that can be quickly deployed and used in many situations, from construction sites, to work-zone safety, to roads and highway projects.
Water-Wall can quickly and easily connect directly to the SLED end treatment
For added privacy and security, the Water-Wall can be equipped with with chain fence sections to create a secure barrier
MASH Tested, Passed and Eligible
Product Overview
The TrafFix Water-Wall™ is a plastic, water filled portable module that can produce the desired energy attenuation characteristics to decelerate an impacting vehicle.
TrafFix Water-Wall sections are designed to link together to form a portable TL-1 longitudinal water filled barrier that provides positive separation between moving vehicles and workers or pedestrians in the protected zone. Single TrafFix Water-Wall sections are designed to be used as a portable barricade in TL-1, TL-2, or TL-3 applications.
Linked units meet NCHRP-350 crashworthy test requirements for a TL-1 LONGITUDINAL BARRIER
Single units meet NCHRP-350 crashworthy test requirements for a TL-3 BARRICADE
Class 1 Delineator
/
Used to indicate the roadway alignment and curves. Also used to mark utilities. Constructed out of impact resistant fiberglass.
