10" Electric Tile Saw
/Perfect for cutting all types of tile (straight cuts and angle cuts).
Perfect for cutting all types of tile (straight cuts and angle cuts).
Used to transport and haul concrete around the job site. Ideal to increase the productivity of any concrete job with easy transporting of concrete or mortar material.
Call for details on the Concrete Chain Saw.
Concrete Floor Grinders provide solutions for many concrete resurfacing jobs. These units are available in electric and gas powered models.
A Concrete Grinder is a multipurpose tool used for mainly for grinding, polishing, resurfacing, removing stains, and blending uneven concrete surfaces.
There is a selection of stones and scarifiers that can be used with these units. Stones are available in course, medium, and smooth grits. Scarifiers are very aggressive for concrete removal or roughing the existing surface for an over-layment.
The towable concrete mixer is available in gas or electric models.
These units allow you to mix the right amount of concrete, when and where you need it to maximize efficiency and reduce overall job cost.
Whether you’re a contractor that requires a high capacity mixer or a homeowner with a small project, we carry sizes ranging from 3 cubic feet to 12 cubic feet, there is a model that will handle your job requirements.
A Concrete Power Screed is a tool that is used to smooth concrete after it has been poured. The Screed itself can be made out of wood, aluminum, or magnesium.
Concrete screeds are available in various lengths to tame those large concrete jobs, saving time and money.
Concrete vibrators are used on freshly poured concrete so that trapped air and excess water are released and the concrete settles firmly in place in the formwork.
Typical applications include: slabs, stem walls, footings, formed post or pillars, and driveways.
These vibrators are available in both gas and electric power with various shaft lengths and vibrating heads to meet the specific criteria set forth in the pour specifications.
Hand held multi-purpose gas saws are often referred to as an MP saw. These saws are perfect for those smaller jobs.
Portable and light weight, it has the power to tackle larger jobs as well. The versatility of these saws provide an economical and an efficient means to complete your job on time.
With the proper blade, these saws offer many cutting solutions ranging from concrete slabs, walls, pipe, sidewalks, driveways, brick, masonry, steel pipe, I beams, rectangular and square tubing.
The Electric Breaker is great for medium to small demolition jobs. This breaker runs 110/120 volt and with a weight of only 60 lbs. Works great for concrete up to 4”.
With the assortment of bits available, this breaker can make those difficult jobs easy.
The Electric Chipping Hammer is a great tool for smaller demolition jobs.
With the assortment of bits available and the small compact size, the electric chipping hammer provides precise control for chiseling, breaking concrete, asphalt, tile removal, and a variety of other jobs.
Electric Core Drills are available in hand held and upright models with vacuum bases. These units can drill through concrete, asphalt, stone, granite, and marble.
Electric Core Drills provided clean precise openings for installation of sink faucets, water pipe, electrical conduit, or for any applications requiring a specific diameter hole.
Whether you are a professional contractor or a homeowner with a big project, this masonry saw is built for high volume productivity. This saw is available in electric or gas models.
The masonry saw quickly and accurately cuts brick, block, and pavers saving time and money.
The towable mortar mixer is available with an electric or gas motor.
These units allow you to mix the right amount of mortar, when and where you need it to maximize efficiency and reduce overall job cost.
Whether you’re a contractor that requires a high capacity mixer or a homeowner with a small project, we carry sizes ranging from 3 cubic feet to 12 cubic feet. There is a model that will handle your job requirements.
A Power Buggy is designed to transport concrete and other materials across the job site. With a 16 cubic foot capacity and all terrain tires, the power buggy easily transports material over adverse job site terrain.
The stand-on design allows for an unobstructed view of the work site and allows for easy maneuvering. The power buggy is equipped with a hydraulic dump so the load can be accurately dumped without any material waste.
The compact design allows for direct delivery of material in hard to reach areas and will fit through a 48” opening.
A Power Trowel applies a smooth finish to a concrete surface. These trowels are available in walk behind and ride on models ranging in size from 36” to 92”.
The walk behind units are great for small to medium jobs such as driveways or home or garage foundations.
The ride on units are used for large high production jobs such as warehouse foundations, parking garages, or any large foundation where time is essential for completion.
The Electric Rotary Hammer is a compact versatile tool not only for the construction industry but for homeowner/residential applications as well.
This tool easily drills through concrete, masonry, or other hard surfaces for installing anchor bolts, running pipe, or electrical conduit. Insert a chisel bit and this tool can also be used as a chipping hammer.
Another versatile function of the rotary hammer is that it can be coupled with a core bit for a clean and precise opening.
Call for details and availability on all Scarifier Sets.
Scarifiers, also called surface planers or milling machines, remove concrete faster and more aggressively than grinders. That's because they use the rotational action of multi-tipped cutting wheels, or flails, that rotate at high speeds to chip away at the concrete surface. You can choose from many different styles of interchangeable cutter assemblies to achieve the profile you need for each job.
A variety of interchangeable cutting wheels and drum setups allow Scarifiers to perform a broad range of profiling tasks. Applications include removing coatings (even heavy floor tile mastics and rubbery elastomeric or epoxy materials), light or heavy milling, grooving walkways to make them slip resistant, removing trip hazards in sidewalks, and leveling misaligned concrete joints and uneven surfaces.
Used for cutting concrete and asphalt. Cutting depth, cutting speed and materials are important factors in saw selection. Available in push type and self propelled models.
We provide construction and safety equipment to the federal, state and local organizations. We rent and sell materials, supplies and equipment offering flexibility, industry knowledge and superior customer service.