A Concrete Power Screed is a tool that is used to smooth concrete after it has been poured. The Screed itself can be made out of wood, aluminum, or magnesium.
Concrete screeds are available in various lengths to tame those large concrete jobs, saving time and money.
Screeds can be rented or purchased. Please call for more information. 707-673-2165
Concrete vibrators are used on freshly poured concrete so that trapped air and excess water are released and the concrete settles firmly in place in the formwork.
Typical applications include: slabs, stem walls, footings, formed post or pillars, and driveways.
These vibrators are available in both gas and electric power with various shaft lengths and vibrating heads to meet the specific criteria set forth in the pour specifications.
Concrete Electric Breakers -- Bosch is the industry leader in electric breakers, combination hammers, drills, and grinders. The Electric Breaker is great for medium to small demolition jobs. This breaker runs 110/120 volt and with a weight of only 60 lbs. Works great for concrete up to 4”.
With the assortment of bits available, this breaker can make those difficult jobs easy. Concrete Electric Breakers can be purchased or rented.
Hydraulic Breakers - Kent is a leading manufacturer of hydraulic breakers, compaction wheels and plates for skid steer loaders, mini-excavators, backhoes, and large excavators. High quality, robust designs, and high reliability. Quick Connect CP/TAG tops available, as well as interchangable skid steer bracket designs.
Breaker Electric Jack -- Bosch "Jack" 35 lb. electric breaker. Lightweight, hard hitting breaker.
Paving Breakers -- These severe duty pneumatic breakers are manufactured in Michigan City, Indiana. 30lb. to 90lb. size classes.
Electric Chipping Hammer is a great tool for smaller demolition jobs.
With the assortment of bits available and the small compact size, the electric chipping hammer provides precise control for chiseling, breaking concrete, asphalt, tile removal, and a variety of other jobs.
Roto Hammer - The Electric Rotary Hammer is a compact versatile tool that easily drills through concrete, masonry, or other hard surfaces for installing anchor bolts, running pipe, or electrical conduit. Insert a chisel bit and this tool can also be used as a chipping hammer. Can be coupled with a core bit for a clean and precise opening.
Combination Hammer - Bosch combination hammers are a popular choice among contractors.
Demolition Hammer - Sullair River Busters come in models MRB-6, MRB-8, MRD-9, and MRB-11, and they all use 11X type working steel.
Electric Core Drills are available in hand held and upright models with vacuum bases. These units can drill through concrete, asphalt, stone, granite, and marble.
Electric Core Drills provided clean precise openings for installation of sink faucets, water pipe, electrical conduit, or for any applications requiring a specific diameter hole.
The towable mortar mixer is available with an electric or gas motor. These units allow you to mix the right amount of mortar, when and where you need it to maximize efficiency and reduce overall job cost.
Whether you’re a contractor that requires a high capacity mixer or a homeowner with a small project, we carry sizes ranging from 3 cubic feet to 12 cubic feet. There is a model that will handle your job requirements. Also available to rent.
A Power Buggy is designed to transport concrete and other materials across the job site. With a 16 cubic foot capacity and all terrain tires, the power buggy easily transports material over adverse job site terrain.
The stand-on design allows for an unobstructed view of the work site and allows for easy maneuvering. The power buggy is equipped with a hydraulic dump so the load can be accurately dumped without any material waste.
The compact design allows for direct delivery of material in hard to reach areas and will fit through a 48” opening.
A Power Trowel applies a smooth finish to a concrete surface. These trowels are available in walk behind and ride on models ranging in size from 36” to 92”.
The walk behind units are great for small to medium jobs such as driveways or home or garage foundations.
The ride on units are used for large high production jobs such as warehouse foundations, parking garages, or any large foundation where time is essential for completion.
Scarifiers, also called surface planers or milling machines, remove concrete faster and more aggressively than grinders. That's because they use the rotational action of multi-tipped cutting wheels, or flails, that rotate at high speeds to chip away at the concrete surface. You can choose from many different styles of interchangeable cutter assemblies to achieve the profile you need for each job.
A variety of interchangeable cutting wheels and drum setups allow Scarifiers to perform a broad range of profiling tasks. Applications include removing coatings (even heavy floor tile mastics and rubbery elastomeric or epoxy materials), light or heavy milling, grooving walkways to make them slip resistant, removing trip hazards in sidewalks, and leveling misaligned concrete joints and uneven surfaces.
We provide construction and safety equipment to the federal, state and local organizations. We rent and sell materials, supplies and equipment offering flexibility, industry knowledge and superior customer service.
